Copper‐Catalyzed Difunctionalization of Activated Alkynes by Radical Oxidation–Tandem Cyclization/Dearomatization to Synthesize 3‐Trifluoromethyl Spiro[4.5]trienones

A copper‐catalyzed difunctionalizing trifluoromethylation of activated alkynes with the cheap reagent sodium trifluoromethanesulfinate (NaSO₂CF₃ or Langlois’ reagent) has been developed incorporating a tandem cyclization/dearomatization process. This strategy affords a straightforward route to synthesis of 3‐(trifluoromethyl)‐spiro[4.5]trienones, and presents an example of difunctionalization of alkynes for simultaneous formation of two carbon–carbon single bonds and one carbon–oxygen double bond.     

星载海洋激光雷达最佳工作波长分析

星载激光雷达是实现海洋垂直剖面探测的有效工具,也是目前迫切需求的海洋光学遥感手段。对星载海洋激光雷达的波长参数进行评估对保证探测有效性具有重要意义。本文从探测深度和信噪比两方面分析了星载海洋激光雷达探测全球海洋的最佳波长。利用MODIS 10个波段的水体光学特性数据,估算全球海水探测深度及相应的最优波长;并根据太阳夫琅禾费暗线特性,对信号信噪比进行优化。结果表明:在探测深度方面,最优探测波长在488 nm波段的海洋占全球海洋面积的70%左右,并且全球95%以上的海域在488 nm波段的探测深度优于0.8倍的真光层深度;在信噪比方面,相对于488 nm波段,486.134 nm夫琅禾费暗线处采用0.1 nm带宽的滤光片可以将背景光强度降低70%,相应地回波信噪比整体提升了约5.0%。就全球海洋探测来说,使用486.134 nm作为探测波长可以提高探测深度,有效抑制太阳背景光,提高信噪比,因此,486.134 nm是星载海洋激光雷达的最佳工作波长。     

非晶态固体的结构可以决定性能吗?

晶态固体的力学性能与塑性变形主要由结构缺陷, 比如位错的运动决定. 而在非晶态固体中结构如何决定性能, 仍然是固体力学、材料学和凝聚态物理学共同关心但尚未解决的核心问题之一.传统材料学研究的经典范式为"结构决定性能". 遵循这一信条, 已经有大量的实验表征与理论、模拟研究, 尝试将非晶态固体的某种结构特征与性能建立一一对应关系. 但是, 科学界对于非晶固体结构-性能关系成立与否, 以及背后隐藏的规律知之甚少. 本文针对非晶态固体的变形机制以及其微结构特征, 基于分子动力学模拟, 定量评估短程简单结构与中长程复杂结构在决定非晶态固体动力学性能方面的效用. 通过海量抽样每种具体玻璃结构的激活能(标识激发难易程度), 尝试将结构参数与激活能建立定量关系, 从而揭示出非晶态固体结构-性能关系的隐藏主控因素为结构的空间关联, 受限比几何结构本身更关键. 只有某种结构在空间上呈现亚纳米级的空间关联长度, 这种完备结构才有可能有效地决定非晶态固体的力学性能, 而短程简单结构则无效. 进一步, 给出了评价非晶态固体结构预测性能有效性的普适定量方法, 为建立广义无序物质的结构-性能关系提供了筛选准则.      

Improving the robustness of spatial networks by link addition: more and dispersed links perform better

Nonlinear Dynamics - It is an effective way to improve network robustness by adding connectivity links. Although some addition strategies have been proposed, the addition cost in spatial networks...     

Prediction of allergic reaction risk of Shenmai injection based on real-world evidence coupled with UPLC–Q-TOF-MS

The allergic reaction (AR) of Chinese herbal injection (CHI) has become one of the most noticeable focuses of public health in China. However, it still remains a considerable controversy as to whether low-molecular-weight components in CHI have potential sensitization. In this study, the relationship between AR and low-molecular-weight component profile of Shenmai injection was explored by an interdisciplinary technology integrating real-world evidence and ultra-performance liquid chromatography–quadrupole time-of-flight mass spectroscopy (UPLC–Q-TOF-MS). The AR information of hospitalized patients was obtained by comprehensively analyzing real-world evidence from January 2015 to June 2019 at two Chinese hospitals. The UPLC–Q-TOF-MS was exploited to systematically investigate the low-molecular-weight component profile with 50–1500 m/z mass range, and 3725 MS1 peaks were detected. The optimized partial least squares discriminant analysis model was established to map the influence of low-molecular-weight components on AR. The results of this study showed that high levels of organic acids administered intravenously might be a potential risk factor for inducing AR. By using this method, Shenmai injection with high AR risk could be recognized precisely with 100% accuracy before clinical use.     

Evaluation of alumina slurry dispersion by nuclear magnetic resonance relaxation as a comparison to conventional dispersion evaluation methods

In this paper, we evaluated the particle dispersion degree of alumina slurry containing a dispersant by solvent nuclear magnetic resonance (NMR) relaxation and compared it with conventional dispersion evaluation methods such as viscosity, particle size, and sedimentation height measurements. The dispersion of slurry was evaluated via numerical analysis of the transverse relaxation time (T₂). The effect of the changes in different parameters of the experiment in terms of milling time, solid loading, and dispersant amount was investigated by NMR relaxation as well as conventional methods. The results of NMR relaxation measurements revealed that T₂ correlates well with other dispersion evaluation methods; thus, it is an efficient technique to evaluate the dispersion of alumina slurry, specifically, when studying the effect of the change in milling time and dispersion amount.     

Transition Metal Doping Induces Ti3+ to Promote the Performance of SrTiO3@TiO2 Visible Light Photocatalytic Reduction of CO2 to Prepare C1 Product.

Transition metal Fe, Co, Ni and Cu doped strontium titanate-rich SrTiO₃@TiO₂ (STO@T) materials were prepared by hydrothermal method. The prepared doped materials exhibit better photocatalytic CO₂ reduction to CH₄ ability under visible light conditions. Among them, Fe-doped and undoped SrTiO₃@TiO₂ under visible light conditions CO₂ reduction products only CO, while M-STO@T (M=Co, Ni, Cu) samples converted CO₂ to CH₄. The average methane yield of Ni-doped STO@T samples are as high as 73.85 μmol g⁻¹ h⁻¹. The production of methane is mainly due to the increase in the response of the doped samples to visible light. And the increase in the separation rate of photogenerated electrons and holes and the efficiency of electron transport caused by the generation of impurity levels. The impurity level caused by Ti³⁺ plays an important role in the production of methane by CO₂ visible light reduction. Ni doping effectively improves the photocatalytic performance of STO@T and CO₂ reduction mechanism were explained.     

Assessing the Importance of Cation Size in the Tetragonal-Cubic Phase Transition in Lithium-Garnet Electrolytes**

Lithium garnets are promising solid-state electrolytes for next-generation lithium-ion batteries. These materials have high ionic conductivity, a wide electrochemical window and stability with Li metal. However, lithium garnets have a maximum limit of seven lithium atoms per formula unit (e.g., La₃Zr₂Li₇O₁₂), before the system transitions from a cubic to a tetragonal phase with poor ionic mobility. This arises from full occupation of the Li sites. Hence, the most conductive lithium garnets have Li between 6–6.55 Li per formula unit, which maintains the cubic symmetry and the disordered Li sub-lattice. The tetragonal phase, however, forms the highly conducting cubic phase at higher temperatures, thought to arise from increased cell volume and entropic stabilisation permitting Li disorder. However, little work has been undertaken in understanding the controlling factors of this phase transition, which could enable enhanced dopant strategies to maintain room temperature cubic garnet at higher Li contents. Here, a series of nine tetragonal garnets were synthesised and analysed by variable temperature XRD to understand the dependence of site substitution on the phase transition temperature. Interestingly the octahedral site cation radius was identified as the key parameter for the transition temperature with larger or smaller dopants altering the transition temperature noticeably. A site substitution was, however, found to make little difference irrespective of significant changes to cell volume.     

Daphnane Diterpenoids of Trigonostemon thyrsoideus

Chemistry of Natural Compounds -     

Stable Heterometallic Cluster‐Based Organic Framework Catalysts for Artificial Photosynthesis

A series of stable heterometallic Fe₂M cluster‐based MOFs ( NNU‐31‐M , M=Co, Ni, Zn) photocatalysts are presented. They can achieve the overall conversion of CO₂ and H₂O into HCOOH and O₂ without the assistance of additional sacrificial agent and photosensitizer. The heterometallic cluster units and photosensitive ligands excited by visible light generate separated electrons and holes. Then, low‐valent metal M accepts electrons to reduce CO₂, and high‐valent Fe uses holes to oxidize H₂O. This is the first MOF photocatalyst system to finish artificial photosynthetic full reaction. It is noted that NNU‐31‐Zn exhibits the highest HCOOH yield of 26.3 μmol g^?1 h^?1 (selectivity of ca. 100 %). Furthermore, the DFT calculations based on crystal structures demonstrate the photocatalytic reaction mechanism. This work proposes a new strategy for how to design crystalline photocatalyst to realize artificial photosynthetic overall reaction.